Votre panier est vide.

Panier

ALANGATOR LLC.
10/22® TRIMAG MAGAZINE COUPLER

705105457857 100005354

Clamps Together Three Factory Magazines For Fast Reloads

Low-profile, molded polymer coupler clamps together three factory 10/22® magazines to put 30 rounds at your fingertips for super-fast reloads without fumbling for the next mag. More economical and less bulky than high-cap “banana” magazines, and easy to use. Slide the mags onto the TriMag and secure them by tightening the stainless steel crossbolt with a slot-head screwdriver or even a coin. Loosen the bolt to release the magazines for single use again. Get the Ruger® 10/22® Trimag Pouch.

SPECS: Polymer, matte black. Approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. 1 oz. (69g) wt.

Plus...

Colliers ensemble trois Magazines usine pour recharge rapide

Le coupleur en polymère moulé à profil bas serre trois chargeurs 10/22 d'usine pour mettre 30 cartouches à portée de main pour des rechargements ultra-rapides sans chercher le chargeur suivant. Plus économiques et moins encombrants que les chargeurs « banane » à haut capuchon, et facile à utiliser. Faites glisser les chargeurs sur le TriMag et fixez-les en serrant le boulon en acier inoxydable avec un tournevis à tête plate ou même une pièce de monnaie. Desserrez le boulon pour libérer à nouveau les chargeurs à usage unique. Procurez-vous la pochette Ruger 10/22 Trimag.

SPECS : polymère, noir mat. Environ 1¾"(4,5 cm) de long, 1½ po (3,8 cm) de large. 1 oz (69g) en poids

Plus...

Évaluations client de ALANGATOR LLC. TRIMAG 10/22® MAG COUPLER

Nombre d'évaluations: 14
De brownells.com: 14
Note moyenne: 4,8

Great idea (15/06/2010)

Love these things. Unlike other coupler products, this one does not require any glue and holds the mags conveniently. A+

Good mag coupler (09/09/2010)

Holds mags together positively. Goes together and comes apart with a flat-head screwdriver, which is needed to strip the 10/22 anyway. No glue or tape needed.

The only downside is the screw in the middle is aluminum, but then again, you aren't supposed to over-tighten it, so it's a non-issue.

TriMag Coupler in Competition (08/11/2010)

I used the TriMag at the 2010 Ruger Rimfire Championships. I normally shoot competition pistol, but I was talked into buying a 10/22 and shooting this match by a friend. As the match had a 10 round limit for magazines, the TriMag turned out to be the way to go for fast reloads. In addition to the fast reloads, the setup allows the system acts like a tripod. I was able to set the rifle on a barrel in an upright position for a fast start when the buzzer went off, no tripod needed. Cool stuff!

Dang it, now I'm hooked! I plan on getting several more as backups!

Flawless (02/02/2011)

Theres almost nothing to complain about, the only thing is the colour of the screw.

Very good and an excellent idea but... (18/03/2011)

Good stuff just wish they made a 2 magazine version.
the only bad thing I can say about them is that they interfer with the Buttlercreek foldingstock.
so it is not possible to have it folded while the magazine with the coupler are inserted to the gun.

but other then that superb!

Works GREAT. Condense your 10rnd Mags. (07/07/2011)

I purchased 1 of these to try, and once I had it at the range I decided to buy 6 more. I've been filling a box with my 10rnd Ruger Mags over the years and these are a GREAT way to condense those magazines into a usable product again. The 3 mags combined don't hang as low as a single 26rnd Ruger or Butler Creek Mag. I find these a valuable addition to any 10/22, 77/22 or 96/22 Shooter with a pile of old factory mags.

Outstanding Product (16/07/2011)

This has got to be one of the best new products to hit the market in recent years. Outstanding guality, fair price and ease of use. I cannot say enough to praise this item. JUST BUY IT.

30 rounds and no banana mag! (09/08/2011)

I purchased to use with a bi-pod. I Recommend an extended mag release to aid with ease of re-charging rifle.

No High Capacity Troubles! (02/02/2012)

Works great and is especially good for those of you who live in states which restrict high capacity magazines. :)

Snug fit (06/05/2012)

Connects and holds together up to three standard 10-round Ruger hot-lips mags. Gives you 30 rouns capacity but doesn't protrude as far down as a std 30 round mag. Great for benchrest shooting

Good product (24/04/2014)

Just received this today. While I haven't shot my 10/22 utilizing it, there isn't much that can go wrong with it, and I really like the concept. This is a very secure platform for 3 mags and I have no doubts that it will perform as advertised. I don't have anything negative to say about this product, buy it!

Clever idea (22/09/2015)

This is the second TriMag I order. It holds the mags very securely plus makes it easier to manipulate in and out of the magazine well. Well thought out, well made product. It allows for 30 rounds without sticking out like the 25 round banana magazines. Makes a difference when shooting off short bipod.

BTW, it is the second because I bought more mags, first one is still holding out well.

Luisyamaha

Modifications Needed (18/03/2019)

I have one of these things, and it works 100% as designed and intended. However, I just bought one of the new Mag Lula 10/22 mag speed loaders, anticipating a healing thumb. I was sorely disappointing when I discovered that the speed loader will not function when the mags are clamped in the TriMag device. The TriMag protrudes into the space the Lula needs to lock onto the mag. Dang! And a pity. Either the TriMag or the Lula 10/22 speed loader need a redesign pronto. It is surely not practical to have to take the TriMag off the three mags just to reload. The Lula website also states the loader will not work with the mag twinning device either. Info on this site needs to be updated to inform customers of the conflicts. Neither product is "at fault" it's just that one would hope they were compatible.

Easy to use, very good quality (15/01/2020)

After using a friends, I had to have a couple for myself. Smaller than a 25 round magazine and doesn't hang down as much. I take the grandkids out plinking/target shooting and it is easier on me to keep them loaded for them and makes it easier to swap out..

Lire 14 plus d'avis sur brownells.com

19.9 19.9 1 EUR

Référence: 100005354
ALANGATOR LLC. TRIMAG 10/22® MAG COUPLER 705105457857 Le coupleur en polymère moulé à profil bas serre trois chargeurs 10/22 d'usine pour mettre 30 cartouches à portée de main pour des rechargements ultra-rapides sans chercher le chargeur suivant. Plus économiques et moins encombrants que les chargeurs « banane » à haut capuchon, et facile à utiliser. Faites glisser les chargeurs sur le TriMag et fixez-les en serrant le boulon en acier inoxydable avec un tournevis à tête plate ou même une pièce de monnaie. Desserrez le boulon pour libérer à nouveau les chargeurs à usage unique. Procurez-vous la pochette Ruger 10/22 Trimag.

19.9 EUR 16 19,90 € *

Livraison en env. 21-30 jours.
plus de 10 pces. dans l'entrepôt US.

Caractéristiques: Couleur: Noir Manufacture: Ruger Modèle: 10/22

Ajouter à la Liste d'Envies

Propriétés

Ajouter à la Liste d'Envies

Caractéristiques

Couleur: Noir Manufacture: Ruger Modèle: 10/22 Poids du colis: 0,023kg Hauteur: 38mm Largeur: 46mm Longueur: 66mm

Détails de l'article

US export classification: 0A501.x

Clamps Together Three Factory Magazines For Fast Reloads

SPECS: Polymer, matte black. Approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. 1 oz. (69g) wt.

Plus...

Colliers ensemble trois Magazines usine pour recharge rapide

SPECS : polymère, noir mat. Environ 1¾"(4,5 cm) de long, 1½ po (3,8 cm) de large. 1 oz (69g) en poids

Plus...

Évaluations client de ALANGATOR LLC. TRIMAG 10/22® MAG COUPLER

Nombre d'évaluations: 14
De brownells.com: 14
Note moyenne: 4,8

Great idea (15/06/2010)

Love these things. Unlike other coupler products, this one does not require any glue and holds the mags conveniently. A+

Good mag coupler (09/09/2010)

TriMag Coupler in Competition (08/11/2010)

Flawless (02/02/2011)

Theres almost nothing to complain about, the only thing is the colour of the screw.

Very good and an excellent idea but... (18/03/2011)

Works GREAT. Condense your 10rnd Mags. (07/07/2011)

Outstanding Product (16/07/2011)

This has got to be one of the best new products to hit the market in recent years. Outstanding guality, fair price and ease of use. I cannot say enough to praise this item. JUST BUY IT.

30 rounds and no banana mag! (09/08/2011)

I purchased to use with a bi-pod. I Recommend an extended mag release to aid with ease of re-charging rifle.

No High Capacity Troubles! (02/02/2012)

Works great and is especially good for those of you who live in states which restrict high capacity magazines. :)

Snug fit (06/05/2012)

Connects and holds together up to three standard 10-round Ruger hot-lips mags. Gives you 30 rouns capacity but doesn't protrude as far down as a std 30 round mag. Great for benchrest shooting

Good product (24/04/2014)

Clever idea (22/09/2015)

Modifications Needed (18/03/2019)

Easy to use, very good quality (15/01/2020)

Lire 14 plus d'avis sur brownells.com

Poursuivre vos achats

VOLQUARTSEN RECOIL BUFFER PIN
10/22® RECOIL BUFFER PIN

VOLQUARTSEN

Livraison en env. 21-30 jours.
plus de 10 pces. dans l'entrepôt US. Livraison en env. 21-30 jours.
plus de 10 pces. dans l'entrepôt US.

21,90 € *

Goupilles Receiver

0 (0)

VOLQUARTSEN BLUE 10/22® BOLT RELEASE
RUGER® 10/22® BOLT RELEASE

VOLQUARTSEN

Livraison en env. 21-30 jours.
plus de 10 pces. dans l'entrepôt US. Livraison en env. 21-30 jours.
plus de 10 pces. dans l'entrepôt US.

21,90 € *

0 (0)

VOLQUARTSEN EXTENDED BOLT HANDLE
RUGER® 10/22® EXTENDED BOLT HANDLE

VOLQUARTSEN

Livraison en env. 21-30 jours.
10 pces. dans l'entrepôt US. Livraison en env. 21-30 jours.
10 pces. dans l'entrepôt US.

74,90 € *

Poignées de Chargement

0 (0)

WOLFF KIT 18075 TUNE-UP PAK
RUGER® 10/22® RIFLE TUNE-UP KITS

WOLFF

Livraison en env. 21-30 jours.
plus de 10 pces. dans l'entrepôt US. Livraison en env. 21-30 jours.
plus de 10 pces. dans l'entrepôt US.

14,90 € *

Ressorts

0 (0)

KNS PRECISION, INC. ADJUSTABLE GAS PISTON SYSTEM AKM
AK ADJUSTIBLE GAS PISTON

KNS PRECISION, INC.

Une commande sera émise Précommande nécessaire.
Délai de livraison dépendant du fabricant (env. 6-12 semaines).

214,90 € * 214,90 € - 249,90 €*

Pistons à Gaz

0 (0)

Connexion

Mot de passe oublié ?
S'inscrire

Site Map

CATÉGORIES

Ordering

Service Clientèle

Bienvenue!

Bienvenue sur brownells.lu, le plus grand fournisseur d'accessoires pour armes à feu, Pièces détachées et Outils d'armurerie aux Benelux!

Notre garantie - Votre satisfaction

Si vous aimez tirer, travailler simplement posséder une arme à feu, que ce soit en tant qu'amateur ou professionnel, brownells.lu est à votre services! Depuis plus de 75 ans, tireurs, armuriers professionnels, amateurs, militaires, forces de l'ordre ou encore as du bricolage d'armes à feu se sont tournés vers Brownells pour s'approvisionner en pièces et fournitures de haute qualité.

Vous trouverez plus de 50.000 produits, y compris des pièces détachées uniques d'armes à feu, des accessoires, des outils d'armuriers, des munitions et bien d'autres produits pour entretenir, réparer et mettre à niveau vos armes.