Ihr Warenkorb ist leer.

Warenkorb

RCBS
AUTO PRIMING TOOL

076683094605 749007452

This is a bench mounted priming tool with a fairly good feel and automated primer dropping tubes. Uses standard RCBS press type shellholders. Comes with large and small primer feed tubes and primer rod assemblies for large and small primers. Cases can be primed with this tool without touching the primers with your fingers at all.

Mehr...

Dies ist ein auf einer Bank montiertes Grundierungswerkzeug mit einem ziemlich guten Gefühl und automatisierten Grundierungs-Tropfröhrchen. Verwendet Standard-RCBS-Pressenhülsenhalter. Kommt mit großen und kleinen Zündhütchen und Zündstangen für große und kleine Zündhütchen. Hüllen können mit diesem Werkzeug grundiert werden, ohne die Grundierungen mit den Fingern zu berühren.

Mehr...

Kundenbewertungen zu RCBS AUTO PRIMING TOOL

Anzahl der Bewertungen: 12
Von brownells.com: 12
Durchschnittliche Bewertung: 4,8

25,000 rounds plus, fast and accurate (22.01.2012)

I have reloaded for over 63 years. When this came out
I purchased it,,and used it on many calibers,,,I have
found it to be very fast, very accurate, and
extremely durable. No parts have been replaced in all
these many many years. I am action shooting three
weekends a month,,,, and would hate to go back to the
old way. This tool adds speed to a single stage press
user. Thanks, Davey Crocket

Highly Recommended (04.01.2013)

I received this as a gift and I'm glad for it-- I would have never paid this much money for a priming tool, but it is easily one of my favorite reloading tools. This makes priming fast, easy, and I believe a lot safer than using a handheld priming tool. If it ever wears out (and I don't think it will!), I'll invest in another.

Review (06.10.2013)

I've used many priming tools from press mounted to the popular hand held and there's nothing on the market that I'm aware of that comes close to the RCBS Auto Priming Tool.

This tool has been part of my reloading collection for well over 15 years and for a non-progressive session of cartridge reloading this is the only way I insert primers.

The RCBS Auto Priming Tool is easy to set up and even easier to use. Fill the primer feed tube then insert it into the feed tube hole and you're off and runningâ¦â¦.or should I say priming! The camming action rotates the tube forward placing a fresh primer in the primer cup, then with moderate downward pressure on the priming handle the primer can be felt sliding into the primer pocket and bottoming out..

It just doesn't get any better than thisâ¦.

Why did I wait so long to get one (16.09.2014)

Simple and easy to use but still allows feedback while seating the primer. I have primed over 200 pieces of brass at a time and didn't have hand cramps. Nice

Better than the RCBS hand priming tool (22.12.2014)

RCBS priming tools seem destined to give me fits. The hand primer I used briefly put most of the primers in sideways or flipped completely. This automatic priming tool is much smoother and you can see what's happening before you commit the brass. Loading the primer tubes is sort of fun but RCBS needs to include a simple tool to press the last one in past the plastic feed lips. The method of delivery is unique but not foolproof. At least a third of the primers deposited by the feed tube were also pulled back out of the cup as the tube swung back leaving me to chase them down. Many went between the priming arm and frame and one even dropped into the vertical hole beside the ram. I was able to recover each one that went awol and use them, but there must be something to make it more reliable. Again, it's better than the hand primer but not perfect. You can feel the primer bottom out in the pocket. It could be perfect if it would stop plucking primers back out of the cup on the return stroke...

One Great Priming Tool! (06.07.2015)

I've loaded thousands and thousands of rounds with this. It's worked perfectly from the start, with no setup problems, no problems of any kind. I love the way I can feel the primer being seated.

I recently had a part fail - the priming rod. It was entirely my fault. I wrote RCBS about it and made sure they knew it was my error and they sent a new part immediately, free of charge. I wish every manufacturer had service like this.

Great product, great design, great service. Hey, just get one!

Best I have used (30.04.2018)

I use this tool for priming rifle brass off-press. It is very fast and you can build up a cadence with it once you get the hang of it. The feel is really good;you can feel he primer seat properly. I have tried other brands which had plastic parts that are prone to breakage and had too many problems with jams. This little machine is solidly constructed and I would not be surprised if it outlasted me. I think this is the best priming tool on the market!

Good Tool (10.12.2018)

I have used this tool for over 10 years and have loaded thousands of rifle and pistol primers with it. The feedback when installing the primer is excellent. After using the tool all this time I found that the few mistakes I have experienced are all due to when I try to go to fast. Take your time and all will go well.

Lee Sheii hilders will not work (21.06.2019)

Thats a fact Jack! Just messed around trying to figure out what was wrong with the primer press and that was it, You gotta use a RCBS shell holder!

very nice product (27.11.2019)

thank you Brownells for prompt shipping and great price. works great and have no problems. primer tubes appear to be like ones Dillon Precision uses. would recommend to anyone

Good tool (03.12.2019)

I replaced my LEE PRECISION - AUTO BENCH PRIME tool with this unit, the Lee ended up in the junk, plastic parts that fail, got about two thousand cycles and fell apart, this one puts it to shame.

Over the years I've used several types of primer tools and this one is about as good as it gets. It's was a little difficult to figure out how it functions, nothing big, just getting the bugs out of the set up but after it was up and running it's a snap. Changing from small to large primers is a fifteen second operation.

I mounted mine on a board, set the unit on a block to give the handle room to move and screwed it to a 1"x 6" plank,

One thing i did do and i highly recommend is cut the end off the primer tubes and put a Dillon pick up on them The tubs they send are OK if you don't mind using a sledge hammer to drive it over the primers. Once that was fixed this thing is really comfortable to use, the feel isn't bad at all, just clean the pockets and go.

It's well built, not full of plastic parts and from what i have experienced so far it should last a long long time.

<img width="500" src='/userdocs/reviewimages/cbd38126-14ae-4587-a93b-f8763469098d.jpg' alt=''>

Great Primer Tool (21.04.2020)

This primer tool is great. I wish I had purchased one years ago.

Lesen Sie 12 weitere Bewertungen bei brownells.com

189.9 189.9 1 EUR

Artikel-Nr.: 749007452
RCBS AUTO PRIMING TOOL
Herstellerproduktnummer: 9460 076683094605 Dies ist ein auf einer Bank montiertes Grundierungswerkzeug mit einem ziemlich guten Gefühl und automatisierten Grundierungs-Tropfröhrchen. Verwendet Standard-RCBS-Pressenhülsenhalter. Kommt mit großen und kleinen Zündhütchen und Zündstangen für große und kleine Zündhütchen. Hüllen können mit diesem Werkzeug grundiert werden, ohne die Grundierungen mit den Fingern zu berühren.

189.9 EUR 6 189,90 € *

Lieferzeit ca. 21-30 Tage.
6 Stk. im USA Lager.

Auf die Wunschliste setzen

Details

Auf die Wunschliste setzen

Eigenschaften

Versandgewicht: 0,953kg Höhe: 71mm Breite: 140mm Länge: 363mm

Mehr...

Kundenbewertungen zu RCBS AUTO PRIMING TOOL

Anzahl der Bewertungen: 12
Von brownells.com: 12
Durchschnittliche Bewertung: 4,8

25,000 rounds plus, fast and accurate (22.01.2012)

Highly Recommended (04.01.2013)

Review (06.10.2013)

Why did I wait so long to get one (16.09.2014)

Simple and easy to use but still allows feedback while seating the primer. I have primed over 200 pieces of brass at a time and didn't have hand cramps. Nice

Better than the RCBS hand priming tool (22.12.2014)

One Great Priming Tool! (06.07.2015)

Best I have used (30.04.2018)

Good Tool (10.12.2018)

Lee Sheii hilders will not work (21.06.2019)

Thats a fact Jack! Just messed around trying to figure out what was wrong with the primer press and that was it, You gotta use a RCBS shell holder!

very nice product (27.11.2019)

thank you Brownells for prompt shipping and great price. works great and have no problems. primer tubes appear to be like ones Dillon Precision uses. would recommend to anyone

Good tool (03.12.2019)

Great Primer Tool (21.04.2020)

This primer tool is great. I wish I had purchased one years ago.

Lesen Sie 12 weitere Bewertungen bei brownells.com

Kunden kauften auch

L.E. WILSON, INC. 22 CALIBER (0.223) DIE W/EXPANDING MANDREL
EXPANDING MANDREL DIES

L.E. WILSON, INC.

Lieferzeit ca. 21-30 Tage.
1 Stk. im USA Lager. Lieferzeit ca. 21-30 Tage.
1 Stk. im USA Lager.

94,90 € *

Matrizen für Langwaffen

0 (0)

DEWEY ADAPTER, SMBA FITS .22-.26 CALIBER RODS
COATED ROD ADAPTERS

DEWEY

Auf Lager Lieferzeit ca. 21-30 Tage.
mehr als 10 Stk. im USA Lager.

8,90 € * 8,90 € - 17,90 €*

Putzstockadapter

0 (0)

RCBS SQUARE PRIMER FLIPPER TRAY
SQUARE PRIMER FLIPPER TRAY

RCBS

Nicht auf Lager, Nachbestellung ist momentan nicht verfügbar. Nicht auf Lager, Nachbestellung ist momentan nicht verfügbar.

14,90 € *

Zubehörf für Zündhütchensetzer

5 (1)

RCBS HAND PRIMING TOOL
HAND PRIMING TOOL

RCBS

Nicht auf Lager, Nachbestellung ist momentan nicht verfügbar. Nicht auf Lager, Nachbestellung ist momentan nicht verfügbar.

89,90 € *

Handgeräte

3,5 (11)

RCBS .17 TO .60 CAL CHAMFER/DEBURRING TOOL
.17 TO .60 CAL CHAMFER & DEBURRING TOOL

RCBS

Nicht auf Lager, Nachbestellung ist momentan nicht verfügbar. Nicht auf Lager, Nachbestellung ist momentan nicht verfügbar.

39,90 € *

Hülsenmundenentgrater

3 (2)

Anmeldung

Kennwort vergessen?
Registrieren

Site Map

PRODUKT GRUPPEN

Ordering

Kundenservice

Willkommen bei Brownells, dem führenden Händler für Waffenteile, Werkzeug und Zubehör für Waffen in der Benelux!

Unser Versprechen

Wenn Sie gerne schießen oder mit Waffen arbeiten, ob für Hobby, Beruf oder Sport, sind Sie bei uns richtig! Keine Extrakosten für Zoll und kein Mindestbestellwert!

Seit über 75 Jahren vertrauen Schützen, professionelle Büchsenmacher, Enthusiasten, Militär / Polizei und Waffen-Tüftler den qualitativ hochwertigen Waffenteilen und -zubehör von Brownells.

Sie finden bei uns mehr als 50.000 Produkte, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning Ihrer Waffen.

* Preise inkl. 16% MwSt(LU)., zzgl. Versand

Klassische Ansicht

Mobile Ansicht