Our Sinclair forend adapter mounts securely to your Freeland-style and Anschutz accessory rail to provide a wide, stable surface for shooting from sand bags or from a target rest. The extra-wide, anodized aluminum base is ultra-steady on the rest with twin runners that track smoothly and help the rifle travel straight rearward under recoil. A simple, bolt-on way to give your rifle that rock-solid feel on the bench.The Sinclair Picatinny Rail Adapter lets you use the Sinclair Benchrest Forend Rail Adapter on a rifle with a Picatinny rail on the underside of the forearm.
Mehr...
Unser Sinclair-Stulpenadapter wird sicher an Ihrer Freeland-Stil- und Anschutz-Zubehörschiene befestigt und bietet eine breite, stabile Oberfläche zum Schießen aus Sandsäcken oder von einer Zielauflage. Die extrabreite, eloxierte Aluminiumbasis ist extrem stabil und verfügt über zwei Führungsschienen, die eine reibungslose Spurführung gewährleisten und dem Gewehr helfen, unter Rückstoß geradeaus nach hinten zu fahren. Mit dem Sinclair Picatinny Rail Adapter können Sie den Sinclair Benchrest Forend Rail Adapter für ein Gewehr mit einer Picatinny-Schiene an der Unterseite des Unterarms verwenden.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL SINCLAIR BENCHREST FOREND RAIL ADAPTER
Anzahl der Bewertungen: 20
Von brownells.com: 20
Durchschnittliche Bewertung: 4,8
Poorly fitting part(16.04.2015)
I purchased this adapter in conjunction with part #749011468
SINCLAIR BENCHREST FOREND RAIL ADAPTER so I could use it on a few rifles that have picitinny rails mounted under the fore ends. After I received the two parts I was surprized to discover they did not fit together! After carefully measuring the two parts with Vernier calipers I discovered that one of the dimensions of the picitinny adapter was .005" undersize. After an hour of careful filing and try-fitting I managed to fit the parts together to my satisfaction, however now at some point I will have to purchase another #749011468 SINCLAIR BENCHREST FOREND RAIL ADAPTER to use on my Sako TRG 22. This certainly is not indicative of Sinclair products and I'm sure I was just unlucky with this particular purchase, however it did happen and I want to make it known that it may be an issue!?
Good Product .... But ...(15.09.2015)
What the instructions don't say is that it is a press fit with the Benchrest Adapter. Just tightening the screws will leave it canted and throw off your accuracy (a lot). I used a couple of small wood blocks and a vise to press mine together. That made a world of difference in how level my rifle is now. Would have given it 5 stars except for that.
Fits Together Perfect with 749011468(23.11.2015)
I found that the Picatinny Adapter fits perfect with the Benchrest Forend Rail Adapter. No issues with oversize or undersize parts as some other reviewers noted.
Fits Together Perfect with 749-011-468 (21.11.2017)
Maybe factory paid attention to some negative reviews here and made some corrections to this model... But it really fits perfectly with rest adapter and I had no even tiny problem attaching the parts together. I am so happy with this mount!
Secure and Convenient(31.08.2019)
This adapter makes it quick and easy to switch from benchrest to bipod set up or from rifle to rifle. Well made and well worth the money.
Great Adapter(20.09.2019)
This product allows the user to switch from benchrest sled to bipod in minutes. I've mounted these on four rifles and am very pleased with the easy mount/dismount. Solid, excellent quality and stays clamped to the rails even with heavy-recoiling rifles.
Fits like a glove (09.12.2019)
Use this along with the benchrest bag rider and it makes quick on and off picatinny rails . Solid mount that works perfect .This is the second one Iâve purchased as a set with the bag rider .this fits like a glove with the Sinclair benchrest front bag rider .
Better Than Expected(16.11.2011)
I use this on a Savage 12 F to emulate a true BR stock - 3 inches wide. I love that it rides on two rail, very slick and won't blemish the (expensive) front bag. In fact I'm going to get a couple more, even for a .22 CZ. This will facilitate not having to change bags or rests to shoot nearly any rifle in this style. Highly recommended.
Fantastic Product(07.04.2013)
This adapter does a perfect job at a great price. Couldn't ask for better.
Perfect(27.06.2013)
Great product, it's made extremely well. I was looking for this exact product that I could swap between my Atlas bipod and a tracking plate easily.
excellent!!!(12.03.2014)
Recommended to anyone. Best money I have ever spent. Very well made. Works perfectly.
Quality is let down by fixing screws(09.07.2014)
Forend plate is good quality, just found the Hex key holes in the rail fixing screws not good.
I had one Hex key difficult to insert, I thought it was in okay but as soon as I applied a small pressure - bummer it slipped out, creating a burr on the hole. Became impossible to then get the hex key in again.
Definitely the rail fixing screws are too soft...!
My fix was to use a Dremel to clean up the burs, then cut a flat screw driver slot into the screw top as extra insurance. The next step is to purchase some new tough screw replacements.
(PS - I did heed there advice not to lock up too tight - yet in reality this rail must be very firmly fixed to avoid movement during use from recoil. Hence my concern about screw quality.)
Someone deserves a design prize for this(20.03.2015)
Even when a high quality bench rest is used, shooting results will always be limited by how well the gun is held steady on the rest. When used with the âBenchrest Picatinny Adapterâ (080-000-972WB), this accessory stabilizes AR handguards and other rounded and/or thin fore ends and stocks very well, and makes it much easier to shoot good groups. The first time I used it I noticed an immediate improvement with rifles that werenât designed for bench rests. Removing a frustrating variable when trying to zero a tactical or hunting rifle makes it well worth its reasonable price.
Looks Very Slick Too(24.10.2017)
I purchased one rail adapter for my Rem. 700 in 308 and was instantly pleased with results. I was also pleased with the fact I measured and purchased stainless bolts and was at the range the same day. Today I confirmed the results are owed to this adapter, so I ordered one for my RPR. The rail adapter is on back order . Can not wait for the results.
Fits Kimber 82g (13.08.2018)
It fit the rail on my CMP Kimber 82G perfectly. Did Not fit my Remington 40X HB US marked with out filing width and thickness of the square nuts that slide into the rail. Took about an hour to file and fit
A Great Shoooting Aid(02.05.2019)
For the first time ever, I have been able to test the absolute accuracy of my ammunition (tenex) and target rifle (1813). This makes the front end rock solid in my rest, without any rotation. 10 shots..one hole!
Quality made and finished product(31.08.2019)
Once in hand the machining and finish of this product are very impressive, especially for the price. Works well on my Cowan rest w/ Protektor 3" bag. I use it for 100/200yd .22lr match shooting with a Vudoo V22 in a KRG Bravo stock.
Great Accessory for Benchrest(20.09.2019)
I've fittted four of these to four rifles with picatinny rails. It fits in the Sinclair rest perfectly. With the rest and the adapter, the rifle is well stabilized. I would recommend this for any shooter wishing to go from a bipod to a better rest.
Looks as good as it works(09.12.2019)
I purchased one about a year ago and decided to buy another . I have several different front bag riders but this one looks the best .i run this with an Edgewood front bag and a rear bag rider on my guns and get perfect tracking .well made good quality item . I use it with pic rails so I also buy the pic rail adapter from Sinclair. They need a option to buy both unitâs together as most use these 2 items Together and not separate.
Good Product (18.05.2020)
Great product for Bench Rest or F/Class Rifles, that use a Rest with 3" Bag. This is a well made and machined steel Adapter.
I found this a good add on for FTR Rifle Stock ,to be used in F/Open Class. This Product is a good step up ,rather than a New Stock with a 3" forearm.
I now have two rail Adapters to same time switching Rifles
Artikel-Nr.: 749011468 SINCLAIR INTERNATIONAL SINCLAIR BENCHREST FOREND RAIL ADAPTER Unser Sinclair-Stulpenadapter wird sicher an Ihrer Freeland-Stil- und Anschutz-Zubehörschiene befestigt und bietet eine breite, stabile Oberfläche zum Schießen aus Sandsäcken oder von einer Zielauflage. Die extrabreite, eloxierte Aluminiumbasis ist extrem stabil und verfügt über zwei Führungsschienen, die eine reibungslose Spurführung gewährleisten und dem Gewehr helfen, unter Rückstoß geradeaus nach hinten zu fahren. Mit dem Sinclair Picatinny Rail Adapter können Sie den Sinclair Benchrest Forend Rail Adapter für ein Gewehr mit einer Picatinny-Schiene an der Unterseite des Unterarms verwenden.
54.9EUR254,90 €
*
Lieferzeit ca. 21-30 Tage. 2 Stk. im USA Lager.
Eigenschaften:Art: Rest AccessoriesGewicht: 3.2 oz
Artikel-Nr.: 080000972 SINCLAIR INTERNATIONAL BENCHREST PICATINNY ADAPTER Unser Sinclair-Stulpenadapter wird sicher an Ihrer Freeland-Stil- und Anschutz-Zubehörschiene befestigt und bietet eine breite, stabile Oberfläche zum Schießen aus Sandsäcken oder von einer Zielauflage. Die extrabreite, eloxierte Aluminiumbasis ist extrem stabil und verfügt über zwei Führungsschienen, die eine reibungslose Spurführung gewährleisten und dem Gewehr helfen, unter Rückstoß geradeaus nach hinten zu fahren. Mit dem Sinclair Picatinny Rail Adapter können Sie den Sinclair Benchrest Forend Rail Adapter für ein Gewehr mit einer Picatinny-Schiene an der Unterseite des Unterarms verwenden.
39.9EUR2939,90 €
*
Lieferzeit ca. 21-30 Tage. mehr als 10 Stk. im USA Lager.
Eigenschaften:Art: Rest AccessoriesGewicht: 2.82 oz
Our Sinclair forend adapter mounts securely to your Freeland-style and Anschutz accessory rail to provide a wide, stable surface for shooting from sand bags or from a target rest. The extra-wide, anodized aluminum base is ultra-steady on the rest with twin runners that track smoothly and help the rifle travel straight rearward under recoil. A simple, bolt-on way to give your rifle that rock-solid feel on the bench.The Sinclair Picatinny Rail Adapter lets you use the Sinclair Benchrest Forend Rail Adapter on a rifle with a Picatinny rail on the underside of the forearm.
Mehr...
Unser Sinclair-Stulpenadapter wird sicher an Ihrer Freeland-Stil- und Anschutz-Zubehörschiene befestigt und bietet eine breite, stabile Oberfläche zum Schießen aus Sandsäcken oder von einer Zielauflage. Die extrabreite, eloxierte Aluminiumbasis ist extrem stabil und verfügt über zwei Führungsschienen, die eine reibungslose Spurführung gewährleisten und dem Gewehr helfen, unter Rückstoß geradeaus nach hinten zu fahren. Mit dem Sinclair Picatinny Rail Adapter können Sie den Sinclair Benchrest Forend Rail Adapter für ein Gewehr mit einer Picatinny-Schiene an der Unterseite des Unterarms verwenden.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL SINCLAIR BENCHREST FOREND RAIL ADAPTER
Anzahl der Bewertungen: 20
Von brownells.com: 20
Durchschnittliche Bewertung: 4,8
Poorly fitting part(16.04.2015)
I purchased this adapter in conjunction with part #749011468
SINCLAIR BENCHREST FOREND RAIL ADAPTER so I could use it on a few rifles that have picitinny rails mounted under the fore ends. After I received the two parts I was surprized to discover they did not fit together! After carefully measuring the two parts with Vernier calipers I discovered that one of the dimensions of the picitinny adapter was .005" undersize. After an hour of careful filing and try-fitting I managed to fit the parts together to my satisfaction, however now at some point I will have to purchase another #749011468 SINCLAIR BENCHREST FOREND RAIL ADAPTER to use on my Sako TRG 22. This certainly is not indicative of Sinclair products and I'm sure I was just unlucky with this particular purchase, however it did happen and I want to make it known that it may be an issue!?
Good Product .... But ...(15.09.2015)
What the instructions don't say is that it is a press fit with the Benchrest Adapter. Just tightening the screws will leave it canted and throw off your accuracy (a lot). I used a couple of small wood blocks and a vise to press mine together. That made a world of difference in how level my rifle is now. Would have given it 5 stars except for that.
Fits Together Perfect with 749011468(23.11.2015)
I found that the Picatinny Adapter fits perfect with the Benchrest Forend Rail Adapter. No issues with oversize or undersize parts as some other reviewers noted.
Fits Together Perfect with 749-011-468 (21.11.2017)
Maybe factory paid attention to some negative reviews here and made some corrections to this model... But it really fits perfectly with rest adapter and I had no even tiny problem attaching the parts together. I am so happy with this mount!
Secure and Convenient(31.08.2019)
This adapter makes it quick and easy to switch from benchrest to bipod set up or from rifle to rifle. Well made and well worth the money.
Great Adapter(20.09.2019)
This product allows the user to switch from benchrest sled to bipod in minutes. I've mounted these on four rifles and am very pleased with the easy mount/dismount. Solid, excellent quality and stays clamped to the rails even with heavy-recoiling rifles.
Fits like a glove (09.12.2019)
Use this along with the benchrest bag rider and it makes quick on and off picatinny rails . Solid mount that works perfect .This is the second one Iâve purchased as a set with the bag rider .this fits like a glove with the Sinclair benchrest front bag rider .
Better Than Expected(16.11.2011)
I use this on a Savage 12 F to emulate a true BR stock - 3 inches wide. I love that it rides on two rail, very slick and won't blemish the (expensive) front bag. In fact I'm going to get a couple more, even for a .22 CZ. This will facilitate not having to change bags or rests to shoot nearly any rifle in this style. Highly recommended.
Fantastic Product(07.04.2013)
This adapter does a perfect job at a great price. Couldn't ask for better.
Perfect(27.06.2013)
Great product, it's made extremely well. I was looking for this exact product that I could swap between my Atlas bipod and a tracking plate easily.
excellent!!!(12.03.2014)
Recommended to anyone. Best money I have ever spent. Very well made. Works perfectly.
Quality is let down by fixing screws(09.07.2014)
Forend plate is good quality, just found the Hex key holes in the rail fixing screws not good.
I had one Hex key difficult to insert, I thought it was in okay but as soon as I applied a small pressure - bummer it slipped out, creating a burr on the hole. Became impossible to then get the hex key in again.
Definitely the rail fixing screws are too soft...!
My fix was to use a Dremel to clean up the burs, then cut a flat screw driver slot into the screw top as extra insurance. The next step is to purchase some new tough screw replacements.
(PS - I did heed there advice not to lock up too tight - yet in reality this rail must be very firmly fixed to avoid movement during use from recoil. Hence my concern about screw quality.)
Someone deserves a design prize for this(20.03.2015)
Even when a high quality bench rest is used, shooting results will always be limited by how well the gun is held steady on the rest. When used with the âBenchrest Picatinny Adapterâ (080-000-972WB), this accessory stabilizes AR handguards and other rounded and/or thin fore ends and stocks very well, and makes it much easier to shoot good groups. The first time I used it I noticed an immediate improvement with rifles that werenât designed for bench rests. Removing a frustrating variable when trying to zero a tactical or hunting rifle makes it well worth its reasonable price.
Looks Very Slick Too(24.10.2017)
I purchased one rail adapter for my Rem. 700 in 308 and was instantly pleased with results. I was also pleased with the fact I measured and purchased stainless bolts and was at the range the same day. Today I confirmed the results are owed to this adapter, so I ordered one for my RPR. The rail adapter is on back order . Can not wait for the results.
Fits Kimber 82g (13.08.2018)
It fit the rail on my CMP Kimber 82G perfectly. Did Not fit my Remington 40X HB US marked with out filing width and thickness of the square nuts that slide into the rail. Took about an hour to file and fit
A Great Shoooting Aid(02.05.2019)
For the first time ever, I have been able to test the absolute accuracy of my ammunition (tenex) and target rifle (1813). This makes the front end rock solid in my rest, without any rotation. 10 shots..one hole!
Quality made and finished product(31.08.2019)
Once in hand the machining and finish of this product are very impressive, especially for the price. Works well on my Cowan rest w/ Protektor 3" bag. I use it for 100/200yd .22lr match shooting with a Vudoo V22 in a KRG Bravo stock.
Great Accessory for Benchrest(20.09.2019)
I've fittted four of these to four rifles with picatinny rails. It fits in the Sinclair rest perfectly. With the rest and the adapter, the rifle is well stabilized. I would recommend this for any shooter wishing to go from a bipod to a better rest.
Looks as good as it works(09.12.2019)
I purchased one about a year ago and decided to buy another . I have several different front bag riders but this one looks the best .i run this with an Edgewood front bag and a rear bag rider on my guns and get perfect tracking .well made good quality item . I use it with pic rails so I also buy the pic rail adapter from Sinclair. They need a option to buy both unitâs together as most use these 2 items Together and not separate.
Good Product (18.05.2020)
Great product for Bench Rest or F/Class Rifles, that use a Rest with 3" Bag. This is a well made and machined steel Adapter.
I found this a good add on for FTR Rifle Stock ,to be used in F/Open Class. This Product is a good step up ,rather than a New Stock with a 3" forearm.
I now have two rail Adapters to same time switching Rifles