Original military design, M16, with 8-36 thread for direct threading into the "Cleaning Rod, Small Arms", or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses.
SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-10, 4 3/8" (11.2cm).
Mehr...
Original Mil Spec Kammerbürsten
Originales Militärdesign, M16, mit 8-36-Gewinde zum direkten Einschrauben in den "Putzstock, Handfeuerwaffen" oder AR-15 mit 8-32-Gewinde für Standardstangen. AR-10 reinigt die größere .308-Kammer, die für diese Gewehre verwendet wird. Bronzeborsten passen in Kammer, längere Edelstahlbüschel reinigen Rastnasenaussparungen.
SPEZIFIKATIONEN: M16 - NSN 1005-00-999-1435, hat 8-36 Militärgewinde. Erfüllt die Mil-Spezifikation: MIL-B-20100C. AR-15 und AR-10 haben 8-32 Standardgewinde. M16 und AR-15 sind insgesamt 9,8 cm (37/8 "). AR-10, 11,2 cm (4 3/8").
Mehr...
Kundenbewertungen zu BROWNELLS AR-15/M16 CHAMBER BRUSH 8-32M THREADS
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4,8
Different use(29.09.2019)
Currently there no broken shell extractors for 375 or 408 cheyTac rounds. Once that happens your shooting is over till you get it solved
If you push this chamber brush into the broken shell you can drive out the brush with a brass rod from the muzzle end and you are back to shooting.
Not what it is designed but works like s charm every time.
Fits the military M16 cleaning rods(13.11.2019)
These brushes fits the military M16 cleaning rods perfectly and make excellent replacements for those surplus military cleaning kits you have in your range bag.
As Advertised(28.01.2010)
Works well to remove stubborn buildup, including that from lacquered ammo. Easy to use.
A basic cleaning brush and a must have!(30.03.2010)
Works well. Gets all that crud out of the chamber and lugs especially if you shoot cheap stuff like Wolf. I would buy 2 or 3 if you shoot a lot. Can't hurt to have spares.
A must have for every AR owner!(26.07.2011)
Best built brush I've used, is holding up well.
Good cleaning tool(12.10.2011)
This is great for the hard to reach chamber cleaning. The first time I cleaned my chamber I must've used 10,000 Q-tips. The chamber brush will help out w/ making cleaning easier and quicker.
Almost perfect (07.12.2015)
Everything was just right except the brass portion, with its uniform diameter, it's too long. It needs to reduce in diameter to accommodate the portion of the chamber that correlates to where the brass neck reduces towards the bullet. After you get it in there and mush the end down it fits alright. Also you'll need a pistol cleaning rod with a handle that does NOT rotate, otherwise you can't rotate the brush within the chamber to be effective. It takes a little use to get it shaped right.
Probably the most hated tool used in cleaning ARs. No matter what you do, you end up sticking fingers. All that aside this one does an excellent job of cleaning chamber and locking lugs.
Artikel-Nr.: 084116016 BROWNELLS AR-15/M16 CHAMBER BRUSH 8-36M THREADS Originales Militärdesign, M16, mit 8-36-Gewinde zum direkten Einschrauben in den "Putzstock, Handfeuerwaffen" oder AR-15 mit 8-32-Gewinde für Standardstangen. AR-10 reinigt die größere .308-Kammer, die für diese Gewehre verwendet wird. Bronzeborsten passen in Kammer, längere Edelstahlbüschel reinigen Rastnasenaussparungen.
14.6EUR13914,60 €
*18,14 €
Lieferzeit ca. 21-30 Tage. mehr als 10 Stk. im USA Lager.
Original military design, M16, with 8-36 thread for direct threading into the "Cleaning Rod, Small Arms", or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses.
SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-10, 4 3/8" (11.2cm).
Mehr...
Original Mil Spec Kammerbürsten
Originales Militärdesign, M16, mit 8-36-Gewinde zum direkten Einschrauben in den "Putzstock, Handfeuerwaffen" oder AR-15 mit 8-32-Gewinde für Standardstangen. AR-10 reinigt die größere .308-Kammer, die für diese Gewehre verwendet wird. Bronzeborsten passen in Kammer, längere Edelstahlbüschel reinigen Rastnasenaussparungen.
SPEZIFIKATIONEN: M16 - NSN 1005-00-999-1435, hat 8-36 Militärgewinde. Erfüllt die Mil-Spezifikation: MIL-B-20100C. AR-15 und AR-10 haben 8-32 Standardgewinde. M16 und AR-15 sind insgesamt 9,8 cm (37/8 "). AR-10, 11,2 cm (4 3/8").
Mehr...
Kundenbewertungen zu BROWNELLS AR-15/M16 CHAMBER BRUSH 8-32M THREADS
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4,8
Different use(29.09.2019)
Currently there no broken shell extractors for 375 or 408 cheyTac rounds. Once that happens your shooting is over till you get it solved
If you push this chamber brush into the broken shell you can drive out the brush with a brass rod from the muzzle end and you are back to shooting.
Not what it is designed but works like s charm every time.
Fits the military M16 cleaning rods(13.11.2019)
These brushes fits the military M16 cleaning rods perfectly and make excellent replacements for those surplus military cleaning kits you have in your range bag.
As Advertised(28.01.2010)
Works well to remove stubborn buildup, including that from lacquered ammo. Easy to use.
A basic cleaning brush and a must have!(30.03.2010)
Works well. Gets all that crud out of the chamber and lugs especially if you shoot cheap stuff like Wolf. I would buy 2 or 3 if you shoot a lot. Can't hurt to have spares.
A must have for every AR owner!(26.07.2011)
Best built brush I've used, is holding up well.
Good cleaning tool(12.10.2011)
This is great for the hard to reach chamber cleaning. The first time I cleaned my chamber I must've used 10,000 Q-tips. The chamber brush will help out w/ making cleaning easier and quicker.
Almost perfect (07.12.2015)
Everything was just right except the brass portion, with its uniform diameter, it's too long. It needs to reduce in diameter to accommodate the portion of the chamber that correlates to where the brass neck reduces towards the bullet. After you get it in there and mush the end down it fits alright. Also you'll need a pistol cleaning rod with a handle that does NOT rotate, otherwise you can't rotate the brush within the chamber to be effective. It takes a little use to get it shaped right.
Probably the most hated tool used in cleaning ARs. No matter what you do, you end up sticking fingers. All that aside this one does an excellent job of cleaning chamber and locking lugs.