Ihr Warenkorb ist leer.

Warenkorb

KLEINENDORST
REMINGTON BOLT DISASSEMBLY TOOL

488001000

Universal Design Makes Disassembly Fast, Safe And Easy

Removes striker assembly in seconds for fast disassembly of all Remington bolts. Works with spring relaxed or cocked. Hook fits into the notch of the firing pin head. Rotating the lever pulls firing pin head back and locks it. Fast and easy.

SPECS: 2½" (6.3cm) long body. .690" (17.5mm) I.D. 1" O.D. 3½ oz. (99 g). Aluminum body, steel hook and pivot arms. Fits Rem. 7 ISS, 700, 700 ISS, 40X, 600, 660, 721/722.

Mehr...

Universelles Design macht die Demontage schnell, sicher und einfach

Entfernt die Schlagbolzenmontage in Sekundenschnelle für eine schnelle Demontage aller Remington-Schrauben. Arbeitet mit entspannter oder gespannter Feder. Haken passt in die Kerbe des Schlagbolzenkopfes. Durch Drehen des Hebels wird der Schlagbolzenkopf zurückgezogen und verriegelt. Schnell und einfach.

SPEZIFIKATIONEN: 2 "(6,3 cm) langer Körper. .690" (17,5 mm) I.D. 99 g (1 "O.D. 3 oz.). Aluminiumgehäuse, Stahlhaken und Schwenkarme. Für Rem. 7 ISS, 700, 700 ISS, 40X, 600, 660, 721/722.

Mehr...

Kundenbewertungen zu KLEINENDORST REMINGTON BOLT DISASSEMBLY TOOL

Anzahl der Bewertungen: 18
Von brownells.com: 18
Durchschnittliche Bewertung: 4,9

700 Bolt Tool (24.02.2010)

Simple in design and use. Makes bolt disassmebly a breeze. If you own or maintain 700's this is a must have.

worth every penny (30.08.2011)

Works as advertised, huge time saver in the shop. Slips on, holds the cocking piece back off the bolt body securely by "camming over" and allows you to unscrew the firing pin assembly in seconds. If you do a fair amount of 700 work, this is absolutely worth it.

Great for the tool box and/or range bag! (11.04.2012)

It is a great little tool to have handy. If you do any amount of 700 work this is a must have in the tool box.

This wokrs like a champ (06.12.2012)

After having the firing pin stick in my arm. I knew there was a better way to set the roll pin.
This simple little tool did the trick just fine.
I do recommend that You apply tape to any freshly painted surfaces.

A must have ! (14.04.2013)

This is the simplest, most well designed, and easy to use tool that every Remington owner must have ! I highly recommend it !

Fast and Simple Tool (29.05.2013)

This tool has an extremely positive camming over that prevents the firing oin from getting away from you. It's faster than the Sinclair tool and extremely rugged.
I've given them as Christmas gifts to my shooting friends, and I use it everyday as a Gunsmithing Student

simply geat tool (14.06.2013)

Simple gadget makes it so easy to disassemble a Remington 700 bolt for cleaning. Sure beats using a vise, piece of aluminum or steel, and a sanded down dime. Wish I had invented this!

Simply the best (12.07.2013)

This is a simple no nonsense tool. It is easy to use and gets the job done.

A must have! (06.01.2014)

If you own a 700 or work on them, this is a must have tool. The ease of operation is amazing! No more wasted time on disassembly.

a perfect tool (15.01.2014)

So very simple compared to the Owner's Manual

Indispensible (25.06.2016)

I have many Remington rifles and I can't believe I went so many years without this tool! This is a simple tool that makes bolt disassembly a whiz. The way it is constructed there is little chance of marring the shroud when disassembling the bolt. This makes periodic cleaning and lube of the of the threads, firing pin, spring, etc. very simple. If you hunt in very cold weather, you should clean and degrease this item to prevent hung firing pins in the critical moment.

A MUST HAVE for Remington Owners (19.09.2016)

What a handy tool. Easy to use. If you maintain your bolt on a regular basis you NEED this tool. Well made and good finish.I wish I had bought this a long time ago. First time I took my hunting rifle bolt apart I was shocked at the gunk on the firing pin and spring from 30 years of use. Tool is solid black and not gold like the picture.

Excellent tool for a Rem. 700 (18.01.2017)

I purchased a "Kleinendorst" Rem. 700 bolt disassembly tool after receiving an email from Brownell's featuring it. Until then I had no idea they existed. I have three Rem. 700's and this tool works like a charm. Easy as one, two, three. Makes a nice addition to my firearms tool box. I bought mine on sale for around $30 just before Christmas. I recommend this tool to anyone who has a Rem. 700 and wants a quick and simple way to disassemble their bolt for cleaning and maintenance.

Great tool (01.04.2018)

Works well on Rem 700 and my Model 600 as well What a invention!!!!!

Wonât Fit Bergara B14 HMR! (16.07.2019)

Bought this w/the logic that the Bergara B14 HMR has a Rem 700 action. Thought the Kleinendorst Bolt Tool would work on my Bergara. Wrong! The bolt shroud on my Bergara is 1â at its widest. The cylinder/tube that is supposed to fit over the bolt shroud on this Tool is only 1/2â (inside . More detail like the diameter of the cylinder/tube wouldâve been helpful & saved me $. Plus if the metal levers are âsteelâ, itâs poor quality steel. Contacted Brownellâs & they offered to reimburse me my $ if I chose to return it. Very nice of them but chose to sell it or give it away. Wrote this review in hopes other Bergara B14 HMR owners wonât make the same mistake I did.

Great tool (03.09.2019)

Used the tool per the directions and the tool worked exactly as advertised. I have disassembled four Remington 700 bolts so far and this tool makes doing so a snap. I wish I had bought it sooner. I wish the tool was more affordable; however, at least itâs made in the USA!

Works well (09.09.2019)

I used this on my Surgeon 591 Action, and the tool made it easy where previously it seemed impossible.

excellent tool (12.05.2020)

I'd never taken the bolt apart on a Remington before, but I have one that needed detail stripping and cleaning/lubricating. This tool made the job easier than I could have imagined. It worked flawlessly on my 700 SPS. I watched the video before buying, but was surprised to not find instructions in the package. However it is so easy to use that they aren't really necessary. The only part that isn't self explanatory is where exactly the pawl that engages the sear face sets(there are two spots on the firing pin right next to each other and only one works right). I can't recommend this tool highly enough. Anyone with a Remington 700 (or clone) action should get one.

Lesen Sie 18 weitere Bewertungen bei brownells.com

89.9 89.9 1 EUR

Artikel-Nr.: 488001000
KLEINENDORST REMINGTON BOLT DISASSEMBLY TOOL Entfernt die Schlagbolzenmontage in Sekundenschnelle für eine schnelle Demontage aller Remington-Schrauben. Arbeitet mit entspannter oder gespannter Feder. Haken passt in die Kerbe des Schlagbolzenkopfes. Durch Drehen des Hebels wird der Schlagbolzenkopf zurückgezogen und verriegelt. Schnell und einfach.

89.9 EUR 26 89,90 € *

Lieferzeit ca. 21-30 Tage.
mehr als 10 Stk. im USA Lager.

Eigenschaften: Hersteller/Modell: Remington Modell: 700, 7, 40-X, 600, 721, 722, 660

Auf die Wunschliste setzen

Details

Auf die Wunschliste setzen

Eigenschaften

Hersteller/Modell: Remington Modell: 40-X,600,660,7,700,721,722 Versandgewicht: 0,091kg Höhe: 23mm Breite: 43mm Länge: 130mm

Universal Design Makes Disassembly Fast, Safe And Easy

SPECS: 2½" (6.3cm) long body. .690" (17.5mm) I.D. 1" O.D. 3½ oz. (99 g). Aluminum body, steel hook and pivot arms. Fits Rem. 7 ISS, 700, 700 ISS, 40X, 600, 660, 721/722.

Mehr...

Universelles Design macht die Demontage schnell, sicher und einfach

SPEZIFIKATIONEN: 2 "(6,3 cm) langer Körper. .690" (17,5 mm) I.D. 99 g (1 "O.D. 3 oz.). Aluminiumgehäuse, Stahlhaken und Schwenkarme. Für Rem. 7 ISS, 700, 700 ISS, 40X, 600, 660, 721/722.

Mehr...

Kundenbewertungen zu KLEINENDORST REMINGTON BOLT DISASSEMBLY TOOL

Anzahl der Bewertungen: 18
Von brownells.com: 18
Durchschnittliche Bewertung: 4,9

700 Bolt Tool (24.02.2010)

Simple in design and use. Makes bolt disassmebly a breeze. If you own or maintain 700's this is a must have.

worth every penny (30.08.2011)

Great for the tool box and/or range bag! (11.04.2012)

It is a great little tool to have handy. If you do any amount of 700 work this is a must have in the tool box.

This wokrs like a champ (06.12.2012)

A must have ! (14.04.2013)

This is the simplest, most well designed, and easy to use tool that every Remington owner must have ! I highly recommend it !

Fast and Simple Tool (29.05.2013)

simply geat tool (14.06.2013)

Simple gadget makes it so easy to disassemble a Remington 700 bolt for cleaning. Sure beats using a vise, piece of aluminum or steel, and a sanded down dime. Wish I had invented this!

Simply the best (12.07.2013)

This is a simple no nonsense tool. It is easy to use and gets the job done.

A must have! (06.01.2014)

If you own a 700 or work on them, this is a must have tool. The ease of operation is amazing! No more wasted time on disassembly.

a perfect tool (15.01.2014)

So very simple compared to the Owner's Manual

Indispensible (25.06.2016)

A MUST HAVE for Remington Owners (19.09.2016)

Excellent tool for a Rem. 700 (18.01.2017)

Great tool (01.04.2018)

Works well on Rem 700 and my Model 600 as well What a invention!!!!!

Wonât Fit Bergara B14 HMR! (16.07.2019)

Great tool (03.09.2019)

Works well (09.09.2019)

I used this on my Surgeon 591 Action, and the tool made it easy where previously it seemed impossible.

excellent tool (12.05.2020)

Lesen Sie 18 weitere Bewertungen bei brownells.com

Ähnliche Artikel

BROWNELLS RIFLE BENCH BLOCK
EXTRA-LARGE BENCH BLOCKS

BROWNELLS

Ausverkauft Nicht auf Lager, Nachbestellung ist momentan nicht verfügbar.

39,90 € * 39,90 € - 44,90 €*

Arbeitsblöcke

4,8 (19)

STARRETT #S565WB 8 PIECE PIN PUNCH SET
#565 PIN PUNCH SET

STARRETT

Ausverkauft Nicht auf Lager, Nachbestellung ist momentan nicht verfügbar.

129,90 € * 18,90 € - 129,90 €*

Punzen

4,8 (12)

Anmeldung

Kennwort vergessen?
Registrieren

Site Map

PRODUKT GRUPPEN

Ordering

Kundenservice

Willkommen bei Brownells, dem führenden Händler für Waffenteile, Werkzeug und Zubehör für Waffen in der Benelux!

Unser Versprechen

Wenn Sie gerne schießen oder mit Waffen arbeiten, ob für Hobby, Beruf oder Sport, sind Sie bei uns richtig! Keine Extrakosten für Zoll und kein Mindestbestellwert!

Seit über 75 Jahren vertrauen Schützen, professionelle Büchsenmacher, Enthusiasten, Militär / Polizei und Waffen-Tüftler den qualitativ hochwertigen Waffenteilen und -zubehör von Brownells.

Sie finden bei uns mehr als 50.000 Produkte, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning Ihrer Waffen.

* Preise inkl. 16% MwSt(LU)., zzgl. Versand

Klassische Ansicht

Mobile Ansicht