Comfortable, rubber over-molded pistol grip and forend provide maximum performance and recoil control in all types of shooting scenarios. Advanced Tamer technology features an internal Sorbothane cushion that helps dampen felt recoil in the web of the hand. Pistol grip design includes dual palm swells and equally proportioned finger grooves, allowing both right- and left-handed operators to shoot with confidence. Pebble textured rubber surface provides a firm grip even when wet. Models available for Remington 870, Mossberg 500, 590, and 835. Rem. model includes 1-1⁄8" wide sling loop molded into pistol grip
Main de remplissage pour une adhérence maximale & contrôle
Confortable, la poignée de pistolet trop moulés en caoutchouc et têtière procurent un contrôle maximum performance et recul dans tous les types de scénarios de tir. Tamer doté de la technologie de pointe un coussin de Sorbothane interne qui permet d'amortir le recul ressenti dans la page web de la main. Conception de la poignée pistolet comprend double palme se gonfle et tout aussi proportionnée des rainures de doigt, ce qui permet les deux opérateurs à droite et à gauche main tirer avec confiance. Galets en caoutchouc texturé surface fournit une poigne ferme même lorsqu'il est mouillée. Modèles disponibles pour Remington 870, Mossberg 500, 590 et 835. REM. modèle comprend 1-1⁄8 "boucle de sangle large moulée dans la poignée pistolet
SPECS : moulé polymère, en caoutchouc surmoulé, noir. REM- Têtière est 7½"(19cm) long, 1¾" (4,4 cm) de large, 1¾"(4,4 cm) de haut. Grip - 6"(15,2 cm) de long. Mossberg-Têtière est 7¾"(19,7 cm) de long, 1-7 ⁄ 8" (7.6 cm) de large, hauteur de 1¾". Grip - 5¾"(14,6 cm) de long. Mossberg têtière Adaper écrou requis pour Mossberg 500/590/835 avec têtière tubes 6¾"
Plus...
Évaluations client de HOGUE REM. TAMER GRIP & FOREND
Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 5
Great pistol grip(23/09/2009)
Easy installation! Feels good in the hands, non slip. Reduces felt recoil more than any hard plastic pistol grip.
Great grip(22/10/2009)
Fits hands perfectly. Very easy to install, 15min.
Much better than a factory one(06/11/2009)
Much better than the hard plastic factory P grips (or anyone else's P grip). The Hogue overmolded texture makes for a nice firm no slip grip and the soft spot at the back makes it much easier to shoot.
WOW!!(09/07/2010)
I have not shot with this grip yet, but plan to write another review when I do. That being said installation took a mere 5-10 minutes max. Also I do have the heat shield installed, the trick to getting the foregrip on is to slide it forward about 1/2 inch when reinstalling the barrel but it absolutely fits!! Feels great and looks great!!
Another Great Hogue Product(18/08/2010)
Easy installation, just be careful not to over tighten the nut that holds the forestock on, 15 minute installation! Really helps stop the recoil, when using the pistol grip, a whole lot better than plastic pistol grips that don't have the rubber coating! I will recommend to all of my friends! I'm going to order set for my remington 870!!
Looks great(23/01/2012)
Its awsome.
Far exceeded my expectations.(15/12/2012)
I use this Hogue kit to convert my faithful Rem. 870 between trips to the woods into a home defense companion. Looked at some of the hard plastic competitors but decided on this kit and I couldn't be happier. Great 'grip-ability' with a rubbery, pebble-like, finish. Looks great and came with the correct hardware that makes it easy to change from traditional butt-stock to pistol grip. I leave the forend on all the time and it handles so well. Would I recommend it? Well, I'm getting 2 more sets for my nephews (one Rem 870 the other a Mossberg 500), if that answers your question. Don't hesitate to choose this kit if you are looking for an awesome home defense set-up.
Great Purchase!(11/01/2013)
The pistol grip fits great on the gun and feels great in your hand. The forend feels just as good and is easy to install. You can use the 870 wrench to remove the forend or needle-nose pliers. Worth every penny.
Awesome(23/02/2013)
Needed a new fore end for the gun as I noticed the factory one was all chewed up when I took it down to do a Cerakote job.
This package was less than the cost of just a fore end alone so it was an amazing value.
I now have Hogue grips on all of my guns (AR15, S&W 500, 1911, Browning Hi-Power and others) and this package lives up to my already high expectations.
The fit in my hand of the pistol grip is outstanding, and I'm in love with the rubberized fore end. Hogue = Awesome. Period.
Référence: 408000054 HOGUE REM. TAMER GRIP & FOREND Ref Fabricant: 08715743108087152 Confortable, la poignée de pistolet trop moulés en caoutchouc et têtière procurent un contrôle maximum performance et recul dans tous les types de scénarios de tir. Tamer doté de la technologie de pointe un coussin de Sorbothane interne qui permet d'amortir le recul ressenti dans la page web de la main. Conception de la poignée pistolet comprend double palme se gonfle et tout aussi proportionnée des rainures de doigt, ce qui permet les deux opérateurs à droite et à gauche main tirer avec confiance. Galets en caoutchouc texturé surface fournit une poigne ferme même lorsqu'il est mouillée. Modèles disponibles pour Remington 870, Mossberg 500, 590 et 835. REM. modèle comprend 1-1⁄8 "boucle de sangle large moulée dans la poignée pistolet
59.9EUR2159,90 €
*
Livraison en env. 21-30 jours. plus de 10 pces. dans l'entrepôt US.
Comfortable, rubber over-molded pistol grip and forend provide maximum performance and recoil control in all types of shooting scenarios. Advanced Tamer technology features an internal Sorbothane cushion that helps dampen felt recoil in the web of the hand. Pistol grip design includes dual palm swells and equally proportioned finger grooves, allowing both right- and left-handed operators to shoot with confidence. Pebble textured rubber surface provides a firm grip even when wet. Models available for Remington 870, Mossberg 500, 590, and 835. Rem. model includes 1-1⁄8" wide sling loop molded into pistol grip
Main de remplissage pour une adhérence maximale & contrôle
Confortable, la poignée de pistolet trop moulés en caoutchouc et têtière procurent un contrôle maximum performance et recul dans tous les types de scénarios de tir. Tamer doté de la technologie de pointe un coussin de Sorbothane interne qui permet d'amortir le recul ressenti dans la page web de la main. Conception de la poignée pistolet comprend double palme se gonfle et tout aussi proportionnée des rainures de doigt, ce qui permet les deux opérateurs à droite et à gauche main tirer avec confiance. Galets en caoutchouc texturé surface fournit une poigne ferme même lorsqu'il est mouillée. Modèles disponibles pour Remington 870, Mossberg 500, 590 et 835. REM. modèle comprend 1-1⁄8 "boucle de sangle large moulée dans la poignée pistolet
SPECS : moulé polymère, en caoutchouc surmoulé, noir. REM- Têtière est 7½"(19cm) long, 1¾" (4,4 cm) de large, 1¾"(4,4 cm) de haut. Grip - 6"(15,2 cm) de long. Mossberg-Têtière est 7¾"(19,7 cm) de long, 1-7 ⁄ 8" (7.6 cm) de large, hauteur de 1¾". Grip - 5¾"(14,6 cm) de long. Mossberg têtière Adaper écrou requis pour Mossberg 500/590/835 avec têtière tubes 6¾"
Plus...
Évaluations client de HOGUE REM. TAMER GRIP & FOREND
Nombre d'évaluations: 9
De brownells.com: 9
Note moyenne: 5
Great pistol grip(23/09/2009)
Easy installation! Feels good in the hands, non slip. Reduces felt recoil more than any hard plastic pistol grip.
Great grip(22/10/2009)
Fits hands perfectly. Very easy to install, 15min.
Much better than a factory one(06/11/2009)
Much better than the hard plastic factory P grips (or anyone else's P grip). The Hogue overmolded texture makes for a nice firm no slip grip and the soft spot at the back makes it much easier to shoot.
WOW!!(09/07/2010)
I have not shot with this grip yet, but plan to write another review when I do. That being said installation took a mere 5-10 minutes max. Also I do have the heat shield installed, the trick to getting the foregrip on is to slide it forward about 1/2 inch when reinstalling the barrel but it absolutely fits!! Feels great and looks great!!
Another Great Hogue Product(18/08/2010)
Easy installation, just be careful not to over tighten the nut that holds the forestock on, 15 minute installation! Really helps stop the recoil, when using the pistol grip, a whole lot better than plastic pistol grips that don't have the rubber coating! I will recommend to all of my friends! I'm going to order set for my remington 870!!
Looks great(23/01/2012)
Its awsome.
Far exceeded my expectations.(15/12/2012)
I use this Hogue kit to convert my faithful Rem. 870 between trips to the woods into a home defense companion. Looked at some of the hard plastic competitors but decided on this kit and I couldn't be happier. Great 'grip-ability' with a rubbery, pebble-like, finish. Looks great and came with the correct hardware that makes it easy to change from traditional butt-stock to pistol grip. I leave the forend on all the time and it handles so well. Would I recommend it? Well, I'm getting 2 more sets for my nephews (one Rem 870 the other a Mossberg 500), if that answers your question. Don't hesitate to choose this kit if you are looking for an awesome home defense set-up.
Great Purchase!(11/01/2013)
The pistol grip fits great on the gun and feels great in your hand. The forend feels just as good and is easy to install. You can use the 870 wrench to remove the forend or needle-nose pliers. Worth every penny.
Awesome(23/02/2013)
Needed a new fore end for the gun as I noticed the factory one was all chewed up when I took it down to do a Cerakote job.
This package was less than the cost of just a fore end alone so it was an amazing value.
I now have Hogue grips on all of my guns (AR15, S&W 500, 1911, Browning Hi-Power and others) and this package lives up to my already high expectations.
The fit in my hand of the pistol grip is outstanding, and I'm in love with the rubberized fore end. Hogue = Awesome. Period.